Home » Download MediaTek VCOM Driver & Installation Guide

Download MediaTek VCOM Driver & Installation Guide


When it comes to flashing and getting Root Access, the very first thing that appears in any tech freak’s mind is surely either MediaTek VCOM Driver or SP Flash Tool. To have root access on the user device and hence download a huge amount of Custom ROMs on the same, the user needs to have the latest MediaTek Driver installed on the user’s PC.

Download Android VCOM Drivers

 To support the said driver, first, the user has to make sure the phone is supported. If user’s phone is supported by the MediaTek processor then the user can install and use this MediaTek VCOM driver on user PC/Laptop without any problem once the user follows the step by step guide. Mostly, the MediaTek smartphones are supported by the SP Flash tool to install the Official Stock ROM. So to trace a user’s smartphone to such software, the user’s PC must have the right driver known as Mediatek USB VCOM Drivers. To transfer any files to use smartphones such as MP3, videos, apps, or any files, the user’s PC must run this USB VCOM driver.

Download MediaTek VCOM Driver & Installation Guide

Multiple MediaTek USB VCOM drivers for user’s phones are available such as MT67xx preloader drivers and MT65xx preloader. Installing these MediaTek USB drivers on the user’s phone will ensure correct USB data transfers, proper recognition by the user computer of the user’s phone.it also allows its users to run programs such as SP Flash Tool and much more. It depends upon whether the user needs an MT65xx driver or MT67xx driver, depending upon the need of the user. user can check its phone specs to see what MTK processor it uses.

Download MediaTek VCOM Driver

Download the Qualcomm USB Driver ZIP file (ZIP)

Download the ADB USB Driver ZIP file (ZIP)

Download the Android CDC USB Driver ZIP file (ZIP)

Download the MediaTek VCOM USB Driver ZIP file (ZIP)

Download the Android USB Driver

Supported Operating Systems 32-bit or 64-bit

  • Windows XP
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 10 (all versions)

MediaTek processors have been attracting traction for the past couple of years. Found on a variety of devices, the MT67xx and MT65xx  series provide quality performance and have great value among its fans. If the user owns a MediaTek phone, the user would need to install MediaTek VCOM drivers to connect its phone with a Windows PC. In most of the cases, the user will need these drivers when trying to install a custom ROM, flashing firmware files, or TWRP recovery.

Watch video tutorial about VCOM driver [FULLY GUIDE]

MediaTek is a company whose focal point is on chip-designing and processors. It produces a large batting order of processor models that range in features, core count,  and performance. As each phone manufacturer that integrates MediaTek processors utilizes different RAM capacities, users are prone to experience varying performance levels on the same MediaTek MT65xx, MT67xx, or MT68xx chipset.

MediaTek Processors / Model Numbers:

MediaTek processors follow a standard versioning scheme. As the model numbers increase, performance, core-count, and overall features also increase following  are some MediaTek model numbers that user should be familiar with:

  • MT65 Series (MT65xx) Download
  • MT67 Series (MT67xx / Helio) Download
  • MT68 5G Series (MT68xx / Dimensity).

For non-techies, flashing, however, is another job which is performed by a tool such as for MediaTek devices, SP Flash Tool is the most common utility software among consumers. MediaTek devices first need to detect and communicate with the device which is going to be flashed. That’s where most of the beginners fail having successfully connected their devices to the computer same is the case with the flashing tool. If the user is a beginner, multiple tutorials will help the user pass connecting user MediaTek powered smartphones successfully.

There are multiple specifications for the installation of Media Tek Vcom drivers. If user is on 64-bit Windows or Windows 8 or later versions, the user will need to disable digital driver signature enforcement. Or otherwise, Windows XP, Vista (32-bit) or Windows 7 (32-bit) users should ignore this information and can install VCOM drivers as there as unsigned drivers installation will be allowed on those PC.

User can connect their MediaTek Device to the computer and transfer data between the device and the personal computer. Even if the user doesn’t want to flash or modify or change its smartphone; the User should have the correct USB Driver installed in order to avoid any corrupt data transfers.

How to Install MediaTek MT65xx / MT67xx Preloader USB VCOM Drivers

To get started, download the VCOM driver, and extract it to a folder on your computer.

Install VCOM Driver

Next, open “Device Manager” on your computer. Once done, launch the “Add New Hardware Wizard” by following this path: Device Manager -> Action -> Add Legacy Hardware.

Device Manager

Now, in the “Add Hardware Wizard” window, click on “Next.”

Add Hardware Wizard

In the next window, choose “Install the hardware that I manually select from a list” or the “Advanced” option and click on “Next” to continue.

Install the hardware that I manually select from a list

Now you will be asked to select the type of hardware you are installing on your computer. Choose “Show All Devices” and click “Next” to continue.

Show All Devices

In the next window, click on “Have Disk,” choose the “android_winusb.inf” file from the folder where you have extracted the NVIDIA driver file (Step 1), and click on “Next.”

Have Disk

Now, you will see “The wizard is ready to install the Hardware” message. Click on “Next” to start the installation process.

The wizard is ready to install the Hardware

It would take a moment or two for the installation process to get completed, and once it does, you will see the “Completing the Add hardware wizard” window. Click on “Finish” to close this window.

Completing the Add hardware wizard

Done. Now you have successfully installed VCOM driver on your Windows computer. Now you will be able to successfully connect your VCOM based smartphone or tablet to the computer. If you need any help with this installation tutorial, do let me know via comments.